Use the built-in answering system and voicemail service
You can use your answering system and voicemail service together by setting your answering system to answer before voicemail service answers as described below. To learn
how to program your voicemail settings, contact your telephone service provider.
If you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message.
Set your answering system to answer calls at least two rings earlier than your voicemail service is set to answer. For example, if your voicemail service answers after six rings,
set your answering system to answer after four rings. Some voicemail service providers may program the delay before answering calls in seconds instead of rings. In this case,
allow six seconds per ring when determining the appropriate setting.
Retrieve voicemail from telephone service
Voicemail is a feature available from most telephone service providers. It may be included with your telephone service, or may be optional. Fees may apply.
Retrieve voicemail
When you received a voicemail, the handset displays and New voicemail. To retrieve, you typically dial an access number provided by your telephone service provider, and
then enter a security code. Contact your telephone service provider for instructions on how to configure the voicemail settings and listen to messages.
Set your voicemail number
You can save your access number on each handset for easy access to your voicemail.
After you save the voicemail number, you can press and hold to retrieve voicemail.
1. Press MENU when the handset is not in use.
2. Scroll to Settings and then press SELECT.
3. Scroll to Voicemail # and then press SELECT.
4. Use the dialing keys to enter the voicemail number (up to 30 digits).
5. Press SELECT to save.
Turn off the new voicemail indicators
If you have retrieved your voicemail while away from home, and the handset still displays the new voicemail indicators, use this feature to turn off the indicators.
NOTE
This feature turns off the indicators only, it does not delete your voicemail messages.
1. Press MENU when the handset is not in use.
2. Scroll to Settings, and then press SELECT.
3. Scroll to Clr voicemail, and then press SELECT.
Expand your telephone system
You can add new handsets (DS6072), cordless headsets (IS6200) or speakerphones (AT&T TL80133) to your telephone system.
All accessories are sold separately. Your telephone base supports a maximum of five devices.
For more details, refer to the user’s manual that comes with your new device.
ECO mode
This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates automatically whenever the handset is synchronized
with the telephone base.
General product care
Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or
shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry non-abrasive cloth. Do not use dampened cloth or cleaning
solvents of any kind.
Frequently asked questions
The following are the questions most frequently asked about the cordless telephone. If you cannot find the answer to your question, visit our website at www.vtechphones.com
or call 1 (800) 595-9511 for
customer service. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
My telephone does not work at all.
Make sure the telephone base is installed properly, and battery is installed and charged correctly. For optimum daily
performance, return the handset to the telephone base after use.
The display shows No line. I cannot hear
the dial tone.
Disconnect the telephone line cord from your telephone and connect it to another telephone. If there is no dial tone on that
other telephone either, then the telephone line cord may be defective. Try installing a new telephone line cord. If changing
telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Contact your telephone
service provider.
You may be using a new cable or VoIP service, the existing telephone jacks in your home may no longer work. Contact
your service provider for solutions.
To Next Page
Loading...
Need help?
Transmit Frequency
