17
Resetting the Device to Factory Settings
You can reset your device to factory settings by following the steps below:
1. In “Settings”, touch “My Name”
2. Typing R-E-S-E-T into the My Name field, then touch the tick icon.
WARNING: Any data saved in internal memory will be lost. Data saved in
a microSD memory card (not included) will not be affected by resetting
the device. (Apps downloaded from Learning Lodge™ can be reinstalled
in “Downloads”.)
Safety Precautions for Using the Battery and Charger
Important Notes:
• This charger is not a toy. This charger is not intended for use by children.
• The device will charge at temperarures between 41°F~95°F(5°C~35°C).
If the device is not charging properly, please move it to a location with
a suitable temperature.
• Battery is not removable and is not replaceable.
• Disconnect the device from the USB power adaptor and turn off the
device before cleaning.
• Only use the Power Adapter that is included with this package.
• For best results, please use the USB power adaptor that is included
with this package.
• To prevent fire or electric shock, do not expose the unit to rain or moisture.
• The battery in this product must not be disposed of with household waste.
This battery is recyclable, please follow your local recyling regulations.
• Instructions to parents: “Transformers and power supplies for toys
are not intended to be used as toys, and the use of these products by
children shall be under the full supervision of parents.”
• To preserve battery life, the DigiGo™ will go into sleep mode
automatically when there is no input for a few minutes. The Wi-Fi
connection will also be disconnected when the battery power is low.
To Next Page
Loading...