VTech IS 8121-3 User Manual

101
Sound settings
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if
you are calling from outside your local
area. By default, the answering system
answers an incoming call after three
rings.
1. Press MENU/SELECT when the
phone is not in use.
2. Press q CID or p to choose
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p to choose
Ans sys setup, and then press
MENU/SELECT.
4. Press q CID or p to highlight #
of rings, then press MENU/SELECT.
5. Press q CID or p to choose from
6, 5, 4, 3, 2 or Toll saver.
• Toll saver - the answering system
answers a call after two rings
when you have new messages, or
after four rings when there is no
new message. This feature allows
you to check for new messages
and avoid paying long distance
charges when calling from out of
your local area.
6. Press MENU/SELECT to save.
NOTE
• If Smart call blocker is on, the first
ring of all calls will be muted.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English