VTech IS 8121-3 User Manual

100
Set ringer volume
You can select the ringer volume for
incoming home and cell calls. When the
ringer is off, appears on the screen.
To set the ringer volume on home line:
1. Press MENU/SELECT in idle mode.
2. Press q CID or p to highlight
Ringers, then press MENU/SELECT.
3. Press q CID or p to select Home
volume, then press MENU/SELECT.
4. Press q CID or p to sample each
ringer volume for home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press q CID or p to highlight
Ringers, then press MENU/SELECT.
3. Press q CID or p to select Cell
volume, then press MENU/SELECT.
4. Press q CID or p to sample each
ring volume for cell lines.
5. Press MENU/SELECT to save.
Telephone base ringer volume
When the telephone base is idle, press
VOL + or VOL - on the telephone base to
adjust the ringer volume.
When you set the ringer volume to zero,
the base ringer is off and the system
announces, “Base ringer is off.”
NOTE
• Changing the handset ringer volume
does not affect base ringer volume.
• If the ringer volume is set to off, that
handset or the telephone base is
silenced for all incoming calls.
• The ringer volume level also
determines the ringer levels of
intercom calls.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English