VTech IS 8121-3 User Manual

98
Dial modes
Set dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone
to make a call.
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to choose
Settings, and then press
MENU/SELECT to select.
3. Press q CID or p to choose Dial
mode, and then press MENU/SELECT
to select.
4. Press q CID or p to choose
Touch-tone or Pulse, and then press
MENU/SELECT to select.
NOTES
• If you have dial pulse (rotary) dialing
service only, refer to Temporary tone
dialing to temporarily switch from
pulse to touch-tone dialing during a
call.
Area code settings
Set home area code
If you dial your local calls using only
seven digits (area code not required),
you can program your home area code
so that when you receive a call within
your local area, the telephone number
is automatically stored without the area
code in the caller ID log.
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to choose
Settings, and then press
MENU/SELECT to select.
3. Press q CID or p to choose
Home area code, and then press
MENU/SELECT to select.
4. Use the dialing keys to enter a three-
digit home area code.
• Press MUTE/DELETE on the handset
to delete a digit.
• Press and hold MUTE/DELETE on
the handset to delete all digits.
5. Press MENU/SELECT to save.
• The screen returns to the previous
menu.
• You hear a confirmation tone.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English