Registration
If you are replacing a handset on a system that has the maximum number of registered handsets or
wish to change the assigned handset number of your registered handsets, you must rst de-register
the handsets, then re-register all handsets.
To de-register all handsets
1. Press and hold INT/FIND HANDSET on the main telephone base for 10 seconds.
2. When the
IN USE light starts to ash, release the INT/FIND HANDSET button.
3. Press and release
INT/FIND HANDSET again. The IN USE light will turn off and in a few seconds,
all handsets will be de-registered.
4. All handsets will show
NOT REGISTERED.
NOT REGISTERED
• If de-register
process does
not work you
may need to
reset the system
and try again.
To reset: pick
up the handset
and press
. Press the OFF
button and place
the handset back
into the telephone
base or charge.
To Next Page
Loading...
Need help?
General
