Intercom/nd handset
If you cannot nd your handset(s) press INT/FIND HANDSET on the telephone base to page the
handset(s) for up to 60 seconds.
• When the handset is not being used, press
INT/FIND HANDSET.
• Press dialing keys to select the called handset number to be called.
Conference call
It is possible to establish a conference call between any two handsets (or
a handset and the telephone base) and the external line.
If the telephone base or a handset is already connected to the external line,
the telephone base or a handset can join the call by pressing SPEAKER on
the telephone base or on a handset. A conference call will immediately
be established. The screens will show:
PHONE 00:00:25
Call transfer
An external call can be transferred from base to handset, handset to handset, or handset to base.
• The person at a handset or base can transfer an external call to another handset or base by
pressing INT (SPEAKER or INT/FIND HANDSET on the base). The external call is put on hold
automatically.
• Select the handset number to be transferred (1-4 or 0 for the base.)
• The called handset or base will ring and the screen will show
HANDSET 1 IS CALLING.
• Pick up the transferred call on the called handset by pressing
, SPEAKER or INT.
• The people at the two handsets/base will be able to talk to each other. Either person can hang up
allowing the conversation with the external person to resume.
CALL TRANSFERRED will briey
be displayed on the calling handset.
If the transferred call is not answered within 100 seconds, the intercom attempt will be automatically
ended and the external call will return to the rst handset.
• For the INT/FIND
HANDSET
function to work,
the system
handsets need
to be in idle (off)
mode.
Telephone operation
To Next Page
Loading...
Need help?
General
