• If the battery has
not been charged,
place the handset
in the telephone
base, and allow
it to charge for at
least 16 hours.
• Use only the VTech
power supply
provided with your
telephone.
Connect power to telephone base/ handset chargers
1. Plug the power adapter into an electrical outlet not controlled by a wall switch, and the connector
into the bottom of the telephone base.
2. Choose the location for your charger, and plug its power supply into an electrical outlet.
AC power outlet
Telephone outlet
Installation
Connect to phone line
Plug one end of the telephone line cord into the jack at the bottom of the telephone base, Then plug
the other end of the cord into the wall outlet.
AC power outlet
To Next Page
Loading...
Need help?
General
