Your answering system has approximately 15 minutes of recording time, and it can record up to 99
messages. Each message is limited to four minutes.
Turn the answering feature on and off
Press the ANS ON/OFF button on the telephone base to turn the answering
system on or off. When the feature is on, the ANS ON/OFF button will be lit,
the system will answer calls, and incoming messages can be recorded.
Day and time announcements
To set day and time
Before playing each recorded message, the answering system announces the
day and time the message was received.
Set the day and time by pressing TIME/SET twice. You can change settings by
pressing CHANGE, and you can advance to the next type of setting by pressing
TIME/SET again. See the following page for more detailed instructions.
Answering system operation
• When your
answering
system is
powered off,
you can still play
your messages
and change
the answering
system settings
To Next Page
Loading...
Need help?
General
