Installation
Choose a location
For optimal performance of your cordless
telephone system:
1. Choose a central location for the
telephone base.
2. Install your phone(s) as far away as
possible from any other cordless
(wireless) devices such as cordless
telephones, 802.11 wireless routers (for
example, WiFi), etc.
3. Install your phone(s) as far away as
possible from other electronic equipment
such as microwave ovens, televisions,
computers, etc.
4. Install your telephone equipment away
from heat sources and direct sunlight.
5. Avoid excessive moisture, dust or
extreme cold.
Install handset battery
1.
2.
1. Align the two holes in the jack with
the socket pins, then snap the plug
into place according to the color-coded
label.
2. Place the battery in the compartment with
the wires tucked inside.
3. Replace cover by sliding it upwards until
it clicks into place.
4. Be sure to charge the battery in the
handset for a minimum of 16 hours before
you use your phone.
• Use only the
VTech battery
pack supplied
with your phone.
• Place the
handset in
its telephone
base when
not in use to
ensure optimum
performance.
1
3
To Next Page
Loading...
Need help?
General
