Answering system operation
Announcements
1. When playback begins, the total number of messages will be announced.
2. Before each message, the day and time it was received will be announced.
3. After the last message the system will announce,
“End of messages.”
4. If the system has less than ve minutes of recording time left, the time remaining will also be
announced.
Options during playback
1. Press and to adjust the speaker volume.
2. Press
SKIP once to skip to the next message, or press and hold to speed up the message
playback, using the voice prompt of day and time as index.
3. Press
REPEAT to repeat the message currently playing. Press twice
to listen to the previous message, or press and hold to slow down the
message playback process.
4. Press
DELETE X to delete the message currently playing.
5. Press
PLAY/STOP to stop playback.
Delete all messages
To delete all messages, press and hold DELETE X while the phone is idle (not during a call or during
message playback) to delete all old messages. New messages (which haven’t been heard before)
will not be deleted.
• The number of
messages in the
oval message
window ashes
when there are
new messages.
The number in the
message window
is on steady
when are no new
messages.
• While the
telephone base
is idle (off),
press the VOL
and buttons
to change the
telephone base
ringer volume.
While listening
to an incoming
message or
message
playback press
the VOL and
buttons to change
the listening
volume.
To Next Page
Loading...
Need help?
General
