Caller ID
Review caller ID
When the handset or base is idle (off), press the to enter the
caller id review mode.
-OR-
• With the handset or base idle (off), press MENU.
• Press to scroll to CALL LOG.
• Press
SEL. Use and to scroll through the call log entries.
When the beginning or the end of the call log is reached, a
double beep will sound.
• If the call log is full, the oldest entry is deleted to make room
for the new call. If the call log is empty the following message
is displayed when you try to review CID records:
Store caller ID in your directory
• Follow the steps in Review caller ID (above) to nd the record
to be stored.
• The phone number in the caller ID log was sent by the phone
company. You may have to dial the number differently. Press
the # key repeatedly to see the different dialing options. You
can add or remove an initial 1 or the area code. The dialing
options are:
• Press
SEL to store the displayed number.
• If the caller ID record contains both name and number, the
name and number will be stored after pressing SEL.
CALL LOG EMPTY
>CALL LOG
RINGER VOLUME
• Press OFF on
the handset (or
CLEAR on the
base) any time
to exit the caller
ID log.
• All handsets and
the base share
a common caller
ID log, stored
in the base, If a
call log entry is
deleted, it will
disappear from
all handsets and
the base.
595-9511
1-595-9511
800-595-9511
1-800-595-9511
To Next Page
Loading...
Need help?
General
