VTech RM7766HD User Manual

17
Charge the Parent Unit Battery
The parent unit runs on an internal rechargeable battery or AC power. To
continuously monitor your baby, keep the parent unit connected to AC power.
The parent unit turns on automatically after it connects to the power socket for the
rst time using, and its battery will charge at the same time.
Notes:
• Before using the baby monitor for the rst time, charge the parent unit battery for 12 hours.
When the parent unit battery is fully charged, the battery icon becomes solid .
• The standby time varies depending on your actual use.
The battery icon on the screen indicates the battery status (see the following
table).
Battery Indicators Battery Status Action
The screen displays
or .
The LED light
ashes.
The battery power is very
low and may only be used used
for a short time.for a short time.
Charge without interruption
(about 30 minutes).
The battery icon
becomes solid .
The battery is fully
charged.
To keep the battery
charged, connect it to AC
power when in use.

VTech RM7766HD Specifications

General

Pan, Tilt, Zoom	Yes
Night Vision	Yes
Two-way Talk	Yes
Temperature Sensor	Yes
Soothing Sounds and Lullabies	Yes
Type	Video Baby Monitor
Sound Activation	Yes
Number of Cameras	1
Expandable	Up to 4 cameras
Remote Access	Yes
Range	Up to 1, 000 feet
Battery Life	Up to 12 hours
Display Size	7 inches
Wi-Fi	Yes (2.4 GHz for Remote Access)