VTech RM7766HD User Manual

35
Baby Unit Settings
Night Vision
The baby unit has infrared LEDs that allow you to see your baby clearly at night
or in a dark room. When the baby unit being viewed detects low light levels, the
infrared LEDs switch on automatically.
When the night vision mode is activated, the images from the baby unit appear in
black and white on the screen, and also appears.
Turn On/O Night Vision
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby Unit Settings
menu.
3�
Press to select
Night Vision
.
4�
P
ress
or
to turn on/o󰀨.
Notes:
• It is normal to see a short white glare on your parent unit screen as the baby unit adapts to
the dark environment.
• If you adjust the night vision mode while night vision is not activated, the new settings will be
saved and applied the next time it activates.
Tip:
The video quality may vary depending on the surrounding environment and interfering
factors like lighting, objects, colour and backgrounds. Adjust the baby unit angle or place the
baby unit at a higher elevation to prevent glare and a blurry display.
Turn on or o󰀨 Baby Unit
Status LED
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby
Unit Settings
menu.
3�
Press repeatedly to select
Status LED
.
4�
P
ress
or
to turn on/o󰀨.
Adjust Baby Unit Speaker Volume
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to choose
Baby Unit Settings
menu.
3�
Press repeatedly to select
Camera Volume
.
4�
P
ress
or
to adjust (Level 1 - Lowest to Level 5 - Highest).

VTech RM7766HD Specifications

General

Pan, Tilt, Zoom	Yes
Night Vision	Yes
Two-way Talk	Yes
Temperature Sensor	Yes
Soothing Sounds and Lullabies	Yes
Type	Video Baby Monitor
Sound Activation	Yes
Number of Cameras	1
Expandable	Up to 4 cameras
Remote Access	Yes
Range	Up to 1, 000 feet
Battery Life	Up to 12 hours
Display Size	7 inches
Wi-Fi	Yes (2.4 GHz for Remote Access)