VTech RM7766HD User Manual

36
Software and Firmware Update
To ensure that your baby monitor is always at its best performance, the parent unit
will prompt you to update its software and the baby unit rmware when there are
new versions available.
You can check if your device is running on the latest software or to update your
device software manually:
1�
Press
MENU/SELECT
to enter the main menu.
2�
Press repeatedly to select the
General Settings Menu
, press
MENU/
SELECT
.
3�
Press repeatedly to choose
Software Update
, then press
MENU/SELECT
.
4�
Follow the instructions on the parent unit screen to update your baby
monitor. If you skip the updates, the parent unit and baby unit will be updated
automatically when the parent unit is powered o󰀨, and then powered on again.
Reset
On Parent Unit
To restore to the default settings or reset the Wi-Fi connection, you can reset the
parent unit by pressing the
RESET
key at the back of the unit. Insert a pin into the
RESET
hole on the back of the parent unit, and then gently press the key inside.
You can also reset the system to factory default in the
General Settings
.
It will reset all settings on parent unit and also require your to follow steps to reset
baby unit(s).
1�
Press
MENU
to enter the main menu.
2�
Press repeatedly to select the
General Settings Menu
.
3�
Press repeatedly to select
Reset Settings
.

VTech RM7766HD Specifications

General

Pan, Tilt, Zoom	Yes
Night Vision	Yes
Two-way Talk	Yes
Temperature Sensor	Yes
Soothing Sounds and Lullabies	Yes
Type	Video Baby Monitor
Sound Activation	Yes
Number of Cameras	1
Expandable	Up to 4 cameras
Remote Access	Yes
Range	Up to 1, 000 feet
Battery Life	Up to 12 hours
Display Size	7 inches
Wi-Fi	Yes (2.4 GHz for Remote Access)