25
Advanced Operation
Download App for Mobile Access
System requirements
for mobile access:
MyVTech Baby Pro
mobile app
Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p
upload bandwidth per baby unit
Download the free
MyVTech Baby Pro
mobile app and install it to a mobile device,
then use your mobile device and the mobile app to monitor your areas remotely.
1�
Press
MENU/SELECT
when the parent unit is idle.
2�
Press repeatedly to
go to
General Settings
,
press
MENU/SELECT
or
, and again to choose
Connect Mobile Phone
.
3�
Scan the QR code in the parent unit to download the app into your mobile
device.
4�
Follow the instructions in the mobile app to set up and pair your baby unit to the
mobile app.
Alternatively, you can download the mobile app from the App Store or Google Play
store.
Install MyVTech Baby Pro mobile app
1�
Browse the App Store or the Google Play store .
2�
Search for the mobile app with the keyword “
myvtech baby pro
”.
3�
Download and install the
MyVTech Baby Pro
mobile app to your mobile
device.
OR
Scan the QR code on the right to get the app.
Note:
Make sure your mobile device meets the minimum requirement
for the mobile app.
Minimum Requirement:
The mobile app is compatible with:
• Android
TM
6.0 or later; and
• iOS 12 or later.
To Next Page
Loading...
Need help?
General
