VTech RM7766HD User Manual

7
1 Light Sensor
2 Camera Lens
3 Infrared LEDs
• Allow you to see clearly in a dark environment.
4 Microphone
5 Night Light
6
Night Light Control Key
• Go to Night Light section to learn more.
7 LED Indicator
• Red is steadily on when the baby unit is connecting to the parent unit in direct mode.
• Green is steadily on when the baby unit is connected in Wi-Fi router mode.
• Red ashing slowly during video streaming in direct mode.
• Green ashes slowly during video streaming in Wi-Fi router mode.
8 ON/OFF Switch
• Power it on or o󰀨.
9 Speaker
10 Temperature Sensor
11 Power Jack
12 Wall Mount Slots
13 PAIR
• The parent unit and baby unit(s) provided are already paired.
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear a beep sound.
2. Release the PAIR key, and then press the PAIR key again ve times until you
hear another beep sound.
3. The baby unit will sound another beep when the reset completes. Then, the baby
unit will reboot.

VTech RM7766HD Specifications

General

Pan, Tilt, Zoom	Yes
Night Vision	Yes
Two-way Talk	Yes
Temperature Sensor	Yes
Soothing Sounds and Lullabies	Yes
Type	Video Baby Monitor
Sound Activation	Yes
Number of Cameras	1
Expandable	Up to 4 cameras
Remote Access	Yes
Range	Up to 1, 000 feet
Battery Life	Up to 12 hours
Display Size	7 inches
Wi-Fi	Yes (2.4 GHz for Remote Access)