VTech t 2453 - Edit a Number;Name Stored in the Directory; Delete a Number;Name Stored in the Directory; Dial a Number from the Directory

18
19
Basic Operation Basic Operation
8. Press SELECT or PROG to confirm your selection. If you chose Y, a D will be
displayed with the directory entry.
NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds,
and you will not be able to store a new number until you delete a stored number.
Edit a Number/Name Stored in the Directory
1. Press
(DIR). The screen displays DIRECTORY.
2. Press
or to scroll alphabetically through the entries stored in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to edit.
3. When the screen displays the entry you want to edit, press
SELECT. Then press
or until EDIT flashes.
4. Press SELECT. The screen displays the name and number. The cursor ap
pears at the end of the name. Use , and the dial pad keys to edit the
name. Press SELECT to move on to edit the number. Use to back
space and make corrections. Press SELECT to move on to edit the dis
tinctive ring setting.
5. Press SELECT to save the edited information.
Delete a Number/Name Stored in the Directory
1. Press
(DIR). The screen displays DIRECTORY.
2. Press
or to scroll alphabetically through entries in the directory.
-OR-
Press the dial pad key for the first letter of the entry you want to delete.
3. When the screen displays the entry you want to delete, press
SELECT. Then
press
or until ERASE flashes.
4. Press
SELECT. The screen displays ERASE NO YES and the number. The current
choice flashes.
5. Press
or until YES flashes.
6. Press
SELECT. You’ll hear a confirmation beep.
Dial a Number from the Directory
1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
Telephone Directory
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASE
80059595118005959511
80059595118005959511
8005959511
D
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASE
80059595118005959511
80059595118005959511
8005959511
Telephone Directory
Move a Number/Name to the Memory
1. Press (DIR). The screen displays DIRECTORY.
2. Press or to scroll alphabetically through directory.
— OR —
Press the dial pad key for the first letter of the entry you want to move.
3. When the screen displays the entry you want to move, press SELECT. Then press
until SPEED flashes.
4. Press SELECT. The screen displays ENTER 1-9.
5. Press the key (1 through 9) to move this entry from the normal directory to the
speed dial memory and assign the memory location. You’ll hear a confirmation beep. A
memory location number (01 through 09) will be displayed with this entry.
-OR-
Press the dial pad key for the first letter of the entry you want to dial.
3. When the number you want to dial is displayed, press PHONE.
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASESPEED EDIT ERASE
SPEED EDIT ERASE
80059595118005959511
80059595118005959511
8005959511
0101
0101
01