28
29
Basic Operation
Basic Operation
Remote Access Commands (continued)
Function: Command:
Record memo Press *8 , then mailbox number where
you want memo recorded; speak after
beep; press #5 when finished.
End remote access call Press *0 .
Turn system off Press #0; the system announces,
“Answering machine off.” Press # 0
again to turn the system back on.
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote access, the
voice menu will be announced. After the voice menu announcement, if no key is
pressed within 20 seconds, the remote access call will automatically end.
Function: Command:
Answering System - Remote Access
When system is off, it answers after 10
rings and announces, “Please enter your
security code.” Enter your remote access
code.
Connect with the Answering System
You can access many features of this system remotely from a touch tone phone.
1. Dial your telephone number.
2. When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3. Enter a remote command (see Remote Access Commands).
4. Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
* 5 to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function: Command:
Play messages in Press # , then the appropriate mailbox
a mailbox number (1,2, or3). The system plays
new messages. If there are no new messages,
the system plays old messages.
Repeat a message Press #4 while message is playing; press
#4#4 to back up previous message.
Skip a message Press #6 while message is playing;
each press advances up another message.
Stop Press #5 .
Save messages Hang up.
Delete message Press #9 while message is playing.
Review announcement Press #7 ; system plays announcement,
then beeps.
Record announcement Press *7 ; after beep, record announcement,
press #5 to stop. System plays back
announcement.
Answering System - Remote Access
To Next Page
Loading...
