VTech t 2453 - Caller ID Operation; About Call History(Caller ID); Review Call History; Delete Records from Call History

20
21
Basic Operation Basic Operation
Caller ID Operation
About Call History (Caller ID)
Your t 2453 can store up to 90 calls in its caller ID memory. The most recent call will have
the highest number. When the memory is full, the oldest call will be deleted to make room
for new incoming call information. For each call that comes in, the screen displays the
following information between the first and second rings:
• Your caller’s name (15 letters are sent by your telephone company).
• The caller’s area code and telephone number.
• The time and date of the call.
• The repeat tag (*) in the upper right corner, indicating the party has called more than
once.
If you answer a call before the information appears on the screen, it will not be in the call
history.
NOTE: Each handset's call log is independent from the other handset. For example, when
you delete one or all call log entries in one handset, they will not be deleted from the other
handset.
Review Call History
1. Press (CID) to view call history.
2. Use and to scroll through records in call history.
NOTE: Press OFF at any time to exit call history.
Delete Records from Call History
Delete a Specific Call:
1. Locate the record you want to delete from call history.
2. Press DELETE. You’ll hear a confirmation beep.
Delete All Calls:
1. With the handset in idle (OFF) mode, press and hold DELETE. The screen displays
ERASE ALL NO YES. The current choice flashes.
2. Press until YES flashes.
3. Press SELECT. You’ll hear a confirmation beep.
Long distance call
Date of call
Time of call
Position of call
in call history
VTech
L 800-595-9511
5/01 5:40 28
PM
OLD
Party has called
2 or more times
Caller’s
telephone
number
Caller’s name
AM
NEW
*
Caller ID Operation
Store a Call History Record in the Directory
1. Locate the record in the call history you want to store in the directory.
2. If you wish to change how the number is stored, press #. The screen displays
alternate dialing sequences available for this call (area code + number; 1 +
area code + number; number only; 1+ number).
3. Press SELECT, then press until PROGRAM flashes.
4. Press SELECT three times. The screen displays:
5. Press or to select Y or N for distinctive ringer.
6. Press SELECT. You’ll hear a confirmation beep. If you choose Y in step 5
a will be displayed with the directory entry.
Dial a Displayed Number
1. Locate the record in call history that you want to dial.
2. If you wish to change how the number is dialed, press #. The screen displays
alternate dialing sequences available for this call (area code + number;
1 + area code + number; number only; 1+ number).
3. Press SELECT. Press until DIAL flashes.
4. Press SELECT again. The number is automatically dialed.
— OR —
When the number is correctly displayed for dialing, press PHONE.
D
DISTINCT RING? NDISTINCT RING? N
DISTINCT RING? NDISTINCT RING? N
DISTINCT RING? N
80059595118005959511
80059595118005959511
8005959511
DIAL PROGRAMDIAL PROGRAM
DIAL PROGRAMDIAL PROGRAM
DIAL PROGRAM
80059595118005959511
80059595118005959511
8005959511
5/01 5:40 PM OLD28
DIAL PROGRAMDIAL PROGRAM
DIAL PROGRAMDIAL PROGRAM
DIAL PROGRAM
80059595118005959511
80059595118005959511
8005959511
5/01 5:40 PM OLD28