Installation Setup
Telephone Installation
You can choose to connect the telephone base for desktop usage or wall mounting.
Use only the adaptors provided.
Make sure the electrical outlets are not controlled by wall switches.
The adaptors are intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through your
telephone line, make sure you install a DSL filter (not included) between the telephone
line cord and telephone wall jack. Contact your DSL service provider for more information.
Connect the telephone base
Connect the charger
•
•
•
•
To Next Page
Loading...