Only one handset or the telephone base can access the answering system at a time.
During message playback, if there is an incoming call or another handset makes a call,
message playback will be stopped.
Delete all Old Messages
To delete all old messages at the telephone base:
Press X/DELETE twice when the phone is not in use.
To delete all old messages using the handset or base menu:
Press MENU when the phone is not in use.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Answering sys, and then press SELECT.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Delete all old, and then press SELECT.
Press YES to confirm delete. You hear a confirmation tone.
Call Intercept
If you want to talk to the person whose message is being recorded, press
/TALK/
RECALL
or on the handset, or press on the base.
Call screening
The call screening feature lets you listen at the telephone base to a caller leaving a
message. While monitoring an incoming message, you can answer the call by pressing
/TALK/RECALL
or on the handset, or pressing on the telephone base.
To turn call screening on or off:
Press MENU when the phone is not in use.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Answering sys, and then press SELECT.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Ans sys setup, and then press SELECT.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to Call screening, and then press SELECT.
Press or on the handset, or CALLS / or PHONEBOOK / on the
telephone base to scroll to choose On or Off, and then press SELECT.
•
•
•
•
•
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
To Next Page
Loading...
Need help?
General
