19
Rotate the wall mount bracket down to wall mount position and then push it into
the telephone base until it clicks into place.
Plug the telephone line cord (or DSL filter) into the wall jack. Align the holes on
the back of the telephone base with the standard wall plate. Slide the bracket
down until it clicks securely in place. Connect the power adaptor to the telephone
base and an electrical outlet not controlled by a wall switch.
Slide the telephone base down until it clicks securely in place. Bundle the
telephone line cord and power adaptor cord neatly with twist ties if necessary.
2.
3.
4.
To Next Page
Loading...