VTech VH6210 User Manual

11
Headset operation
Headset power on/off
To power on the headset:
Place the headset in the headset base.
-OR-
Press and hold ON/OFF button for two seconds.
The LED light flashes blue three times, and you hear three
beeps when it is being powered on.
To power off the headset:
Press and hold ON/OFF button for four seconds.
The LED light flashes red three times, and you hear three
beeps when it is being powered off.
PHONE mode and PC mode
Before using the headset, you may change the operation mode
of your headset. When the headset is not in use, you can choose
between PHONE mode and PC mode.
To choose PHONE mode:
Press the PHONE button on the headset base. The PHONE light
turns on.
To choose PC mode:
Press the PC button on the headset base. The PC light turns on.
NOTE:
You can also switch back and forth between PHONE mode and PC mode while
on a call. Once selected, the PHONE mode light or the PC mode light flashes
twice every three seconds to indicate that line is on hold.
•
•
•
•
•
•
Before use

VTech VH6210 Specifications

General

Brand	VTech
Model	VH6210
Category	Headsets
Language	English