VWR B2 Series - Working Mode Settings- F Shortcut Keys

- 22 -
If you want the declared non-standard information is to be visible, set parameter P2.1.2 to < NSTD.
INF. > option.
6.9. WORKING MODE SETTINGS- F SHORTCUT KEYS
Function enables assigning quick access for weighing functions which are to be accessible by
pressing F1, F2, F3 or F4 keys. You can choose between the following options for <WEIGHING>
mode: <NONE / ENTER TARE / PRINT HEADER / PRINT FOOTER / VARIABLE 1 / VARIABLE 2>.
These options can be freely assigned to any of the F keys. For other modes there are more available
options (see further sections of this manual).
Functions for particular working modes:
Function
Modes featuring the function
SELECT PRODUCT All modes
LOG IN All modes
ENTER TARE All modes
SELECT TARE All modes
PRINT HEADER All modes
PRINT FOOTER All modes
VARIABLE 1 All modes
VARIABLE 2 All modes
ON/OFF LAST DIGIT All modes
ENTER SAMPLE Parts Counting, Deviations
DETERMINE SAMPLE Parts Counting, Deviations
SET HI_LO Deviations exclusively
START Animal Weighing, Solids Density, Liquids Density