VWR Mega Star 600 - Package Contents; Delivery Content; Unpacking and Installation; Before Setting up

10 VWR Mega Star 600 / 600R ver b, rel 17.07.2020
Package Contents
Description Quantity
VWR Mega Star 600 / 600R Centrifuge 1
Power supply cable 2
Instruction manual 1
If any parts are missing, please contact the nearest VWR representative.
Delivery Content
Part No. Package
521-1893 VWR Mega Star 600 with TX-150 rotor, 4 round buckets and 4 ClickSeal
™
bucket lids
521-1894 VWR Mega Star 600R with TX-150 rotor, 4 round buckets and 4 ClickSeal bucket lids
521-1895 VWR Mega Star 600R with MicroClick 24 x 2 microtube rotor and ClickSeal rotor lid
Unpacking and Installation
Before setting up
1. Check the centrifuge and the packaging for any shipping damage. Inform the shipping company and
VWR immediately if any damage is discovered.
2. Remove the packaging.
3. Check, if the items supplied are complete.
If the order is incomplete, please contact VWR.
Location
The centrifuge should only be operated indoors.
The set-up location must fulfil the following requirements:
• A safety zone of at least 30 cm must be maintained around the centrifuge.
People and hazardous substances must be kept out of this safety zone while centrifuging.
• The supporting structure must be stable and free of resonance.
• The supporting structure must be suitable for horizontal setup of the centrifuge.
• The centrifuge is not to be exposed to heat and strong sunlight.
WARNING UV rays reduce the stability of plastics.
Do not subject the centrifuge, rotors and plastic accessories to direct sunlight.
• The set-up location must be well-ventilated at all times.