CHEMICAL
MATERIAL
ALUMINUM
ANODIC COATING for ALUMINUM
BUNA N
CELLULOSE ACETATE BUTYRATE
POLYURETHANE ROTOR PAINT
COMPOSITE Carbon Fiber/Epoxy
DELRIN
™
ETHYLENE PROPYLENE
GLASS
NEOPRENE
NORYL
™
NYLON
PET
¹
, POLYCLEAR
™
,CLEAR CRIMP
™
POLYALLOMER
POLYCARBONATE
POLYESTER, GLASS THERMOSET
POLYTHERMIDE
POLYETHYLENE
POLYPROPYLENE
POLYSULFONE
POLYVINYL CHLORIDE
RULON A
™
, TEFLON
™
SILICONE RUBBER
STAINLESS STEEL
TITANIUM
TYGON
™
VITON
™
Trisodium
Phosphate
/ / / S / / M / / / / / / S / / S S S / / S / / S / S
Tris Buffer (neutral
pH)
U S S S S S S / S S S S S S S S S S S S S S S S S S S
Triton X/100™ S S S / S S S / S S S S S S S S S S S S S S S S S S S
Urea S / U S S S
S / / / / S S S M S S S S / S S S M S / S
Hydrogen
Peroxide (10 %)
U U M S S U U / S S S U S S S M U S S S S S S M S U S
Hydrogen
Peroxide (3 %)
S M S S S / S / S S S S S S S S M S S S S S S S S S S
Xylene S S U S S S M U S U U U U U U M U M U U U S U M S U S
Zinc Chloride U U S S S S U S S S S S S S S S S S S S S S S U S S
S
Zinc Sulfate U S S / S S S S S S S S S S S S S S S S S S S S S S S
Citric Acid (10 %) M S S M S S M S S S S S S S S S M S S S S S S S S S S
¹ Polyethlyeneterephtalate
Key
S – Satisfactory.
M – Moderate attack, may be satisfactory for use in centrifuge depending on length of
exposure, speed involved, etc.; suggest testing under actual conditions of use.
U – Unsatisfactory, not recommended.
/ – Performance unknown; suggest testing, using sample to avoid loss of valuable
material.
NOTICE
Chemical resistance data is included only as a guide to product use. Because
no organized chemical compatibility data exists for materials under the stress of
centrifugation, when in doubt we recommend pretesting sample lots.
44 VWR Mega Star 600 / 600R ver b, rel 17.07.2020