The complete functionality is described on
the help screen.
This is obtained by pressing the help
button (?).
Help text exists for every screen viewed
during the operation of the MicroLab.
You are recommended to make full use of
the extensive Help screens provided.
Indication for Use
The MicroLab spirometer is intended, for prescription use only, to
measure the maximal volume and ow of air that can be moved in
and out of a patient’s lungs and for pulse oximetry measurements.
The system is intended for use with paediatric (4 to 17 years)
and adult (18 to 99 years) patients in hospitals, physician ofces,
laboratories and occupational health testing environments.
The optional Nonin IPOD
®
Integrated Pulse Oximetry Device is
designed to measure pulse rate and oxygen saturation in adult
patients. The sensor is designed for use on the ngers of patients
weighing more than 30 kilograms, where the nger tissue is
between 5 and 21 millimeters.
Note: Pulse Oximetry is an optional measurement mode. Therefore
the sensor for pulse oximetry measurements is not part of the
standard MicroLab package and needs to be purchased separately.
15
To Next Page
Loading...
