4. After cleaning/disinfecting, the transducer should be immersed
briey in distilled water and left to dry.
5. Re-assemble the mouthpiece holder.
Locating pip
Cut-Out
Housing
Turbine transducer
CAUTION: Do not attempt to wash or immerse the MicroLab
transducer housing in water or cleaning uid, as there are
electronic components inside that will be permanently damaged.
Servicing
There is no routine maintenance required for the MicroLab and
there are no user serviceable parts in this spirometer. Please
return the unit to Vyaire or an authorized agent, if servicing is
required.
If your spirometer requires service or repair please see page 101
for contact details.
84
To Next Page
Loading...
