Vyaire MicroLab - Page 92

Power frequency
(50/60 Hz)
magnetic eld
IEC 61000-4-8
30 A/m
50 & 60 Hz
30 A/m
50 & 60 Hz
If incorrect
operation occurs, it
may be necessary
to position the
Micro Lab further
from sources of
power frequency
magnetic elds or
to install magnetic
shielding. The
power frequency
magnetic eld
should be
measured in
the intended
installation location
to assure that it is
sufciently low.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.
92