Sewing on buttons: Program 89
Using a Pattern
154
Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR
7. Turn the hand wheel of the machine a number of times and check wheth-
er the second hole of the button is also entered precisely.
! Should this not be the case, readjust the stitch width.
! Ensure that the needle does not strike the button during the sewing
process. The needle may break off.
8. Sew a maximum of 10 stitches at a slow speed.
9. Lift the presser foot and cut the thread at a length of 10 cm.
10.Pull the lower thread to bring the upper thread to the left-hand side of the
fabric and knot the threads
» The button has been sewn on
To Next Page
Loading...
