10 Maintenance
100_0302_mt_0001.fm 30
10.4 Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
10.4.1 Cleaning machine
Clean the machine after use.
1. Clean the ventilation slots with a suitable tool.
2. Wipe the housing with a damp and clean cloth.
10.4.2 Topping up with fuel
Performing preparations
1. Switch off the engine.
2. Lean the machine upright against a solid object and secure it to prevent it from toppling over or
alternatively, lay it on its back.
Wacker Neuson recommends to hang the machine on the truck.
3. Let machine cool off.
Topping up with fuel
1. Remove any dirt around the fuel cap.
2. Slowly unscrew and remove fuel cap.
WARNING
Danger of fire and explosions by fuel and fuel vapors.
Do not smoke.
Do not refuel near open flames.
Turn off the engine before refueling and allow it to cool down.
WARNING
Health hazard due to fuel.
Refuel in a well-ventilated environment.
Do not inhale fuel vapors.
Avoid skin and eye contact with fuel.
Item Designation
1Fuel cap
To Next Page
Loading...
