Wacker Neuson BH 55 - Accessories; Truck; Proper use

13 Accessories
100_0302_ac_0001.fm 36
13 Accessories
There is a wide range of accessories available for the machine.
For more information on the individual accessories, visit the following website: www.wackerneuson.com.
13.1 Truck
13.1.1 Proper use
The truck must only be used for the transport of Wacker Neuson large hammers and the required tools.
The truck must not be used for the following:
 Transporting people.
 Transporting other machines except Wacker Neuson large hammers.
The truck must not be attached to vehicles.
Placing hammer on the truck
1. Switch off the machine.
2. Remove tool from the tool holder.
3. Clean the truck's guide rod.
4. Insert hammer with the tool holder on the guide rod and rest on the handles of the truck.
5. Insert tool in the tool holder.
Item Designation Item Designation
1 Hanging device 3 Tool holder
2 Guide rod
CAUTION
Insufficient stability of the truck.
Injury or damage caused by the truck tipping over or rolling off when the hammer is placed
on it.
 Place truck on a level surface.
 Secure truck against rolling off and tipping over.