Commissioning
Putting into operation with Briggs & Stratton engine 7.3
5. Move the engine switch5 into positionA.
6. Pull the starting handle 6.
ð Pull the starting handle slightly until resistance is felt, then pull it
strongly. Slowly return the starting handle.
ð Engine runs.
7. Move choke lever to position A for starting, move choke lever back
to position B while the engine is warm.
ð The machine is ready for operation.
[en-US] | Version: 5 | 04/2023 | 5100066824 | BPS1030B, BPS1135B, BPS1340B, BPS1550B, BPS2050B | BPS |
Operator’s Manual 35
7
To Next Page
Loading...
