Foreword
Limitation of liability 2.5
11
[en] | 07/2022 | 5100056271 | BS-2 | Operator’s Manual
2.5 Limitation of liability
In the event of the following infringements, the manufacturer disclaims
any liability for personal injury and damage to property:
• Actions contrary to this operator’s manual.
• Non-designated use
• Deployment of untrained personnel.
• Use non-approved spare parts and accessories.
• Improper handling.
• Structural changes of any kind.
• Non-observance of the General Terms and Conditions (GTC).
2.6 Use of the operator’s manual
This operator’s manual:
• must be regarded as an integral part of the machine and must be
kept in a safe place throughout its service life.
• must be passed on to each subsequent owner or operator of this ma-
chine.
• applies to various machine types from one product range. For this
reason, some illustrations may differ from the appearance of the pur-
chased machine. Variant-dependent components that are not in-
cluded in the scope of delivery can also be described.
The manufacturer reserves the right to change the information in this op-
erator's manual without notice.
It must be ensured that any changes or additions made by the manufac-
turer are immediately incorporated into this operator’s manual.
Group - Type Material number (Mat. no.)
BS50-2 6" 5100030592
BS50-2plus 6" 5100030597
BS50-2 10" 5100058346
BS50-2 11“ 5100068309
BS50-2 11" 5100030591
BS50-2plus 11" 5100030596
BS60-2 11" 5100030600
BS60-2 11" 5100051580
BS60-2 11" 5100037561
BS60-2plus 11" 5100030604
BS70-2 11" 5100030607
BS70-2plus 11" 5100030609
2
To Next Page
Loading...
