Maintenance
9.2 Maintenance plan
34
Operator’s Manual | BS-2 | 5100056271 | 07/2022 | [en]
NOTICE
Damage by penetrating water!
Penetrating water can damage electrical operating elements or machine
components.
Penetrating moisture can lead to total failure.
► Do not clean the machine with high pressure or steam cleaners!
► Use a cloth to remove water that has entered (e.g. due to rain) the
housing and then let the machine dry.
► Only use dry and clean cloths.
NOTICE
Engine damage from operating the engine without an air filter!
If the engine is operated without an air filter, there is a risk of rapid engine
wear.
► Do not operate the engine without an air filter or air filter cover.
NOTICE
Premature tool failure!
Cooling the tool or tool holder with water can cause premature failure.
► Do not cool tools and tool holders with water.
Environment
Soil contamination due to oil leaking or overflowing.
► Line work surface with impermeable foil.
► Use collecting container for used oil.
► Dispose of used oil in an environmentally friendly manner in accord-
ance with statutory regulations.
9.2 Maintenance plan
Activity Daily
Weekly
25 h
Once a
month
100 h
2 Monthly
200 h
3 Monthly
300 h
Once a
year
Clean the machine.
Visual check for completeness.
Visual check for damage.
●
Clean air filter, replace if necessary. ●
Check oil level; fill if necessary:
• Ramming system
●
To Next Page
Loading...
Need help?
General
