Operation
Operating the machine 8.1
31
[en] | 07/2022 | 5100056271 | BS-2 | Operator’s Manual
8 Operation
8.1 Operating the machine
WARNING
Risk of injury due to uncontrolled machine operation!
► Always hold the machine with both hands and take a firm stand.
► Use safety shoes.
• The operator's designated location is behind the machine.
• Guide and steer the machine using the guide bracket.
• Let the machine move forward on its own. Do not use your muscles
to push it forward or pull it back.
• For optimal control, performance and minimum hand and arm vibra-
tion, hold the guide bracket on the left and right.
• To avoid damage to the machine, do not move the machine when it is
running.
• Exercise caution with rough material. To avoid extreme wear and tear
to the ramming plate, ensure that it is always parallel to the ground
being compacted.
8.1.1 Compacting material
1. Guide the machine with both hands at the guide bracket.
2. Operate the throttle lever until the desired speed is reached.
3. When the material has been compacted, move the throttle lever to
position A.
ð The machine stops.
4. Lift and transfer the machine.
8
To Next Page
Loading...
Need help?
General
