Wacker Neuson BS-2 User Manual

Maintenance
9.3 Maintenance work
40
Operator’s Manual | BS-2 | 5100056271 | 07/2022 | [en]
9.3.8 Check screw connections of the ramming plate
1. Check all screw connections for tightness at regular intervals.
2. Tighten loose screw connections.
6"
11"
11"
1
1
1
1
2
2
2
2
2
3
3
3
3
3
Tightening torque in Nm (ft-lbs.)
1 86 (63)
2 19 (14)
3 79 (58)
9.3.9 Cleaning the cooling fins
1
2
▪ Clean cooling fins on reversing starter 1 and on engine 2 with com-
pressed air to remove dirt and residues.
9.3.10 Checking and changing the spark plug
CAUTION
Risk of burns!
Contact with hot spark plug can cause burns.
► Only unscrew the spark plug when the engine has cooled down.
► Use protective gloves.
NOTICE
► Do not pull the spark plug connector from the spark plug by the igni-
tion cable.

Wacker Neuson BS-2 Specifications

General

Brand	Wacker Neuson
Model	BS-2
Category	Construction Equipment
Language	English