Wacker Neuson BS 60-4 Repair Manual

Rammer Repair Troubleshooting
wc_tx000291gb.fm 131
9.6 Rammer Jumps Erratically
Problem / Symptom Reason / Remedy
There is oil or grease on the
clutch.
Inspect and clean the clutch.
The spring(s) in the ramming
system are broken or worn.
Disassemble the spring cylinder. Inspect and replace
any damaged components.
There are damaged parts in
the spring cylinder assembly.
Disassemble the spring cylinder. Inspect and replace
any damaged components.
There are damaged parts in
the crankcase assembly.
Disassemble the crankcase. Inspect and replace any
damaged components.
There is soil buildup on the
ramming shoe.
Clean and inspect the shoe.
The engine speed is too low. Adjust the engine speed.

Wacker Neuson BS 60-4 Specifications

General

Engine Manufacturer	Honda
Displacement	163 cm³
Operating Weight	66 kg
Percussion Rate	700 blows/min
Engine	Honda GX 160
Stroke	60 mm
Engine Type	4-stroke
Fuel Tank Capacity	3.0 liters