Wacker Neuson BS 60-4 Repair Manual

Repair Engine and Upper Machine Components
wc_tx001546gb.fm 59
4.17 Engine Cooling Fins
Recommended Tools
Screwdriver
Compressed air
The Wacker WM 80 engine is air cooled, so dirt accumulation between
the cylinder ribs may cause the engine to overheat. Use a screwdriver
to remove any dirt that is impacted between the cylinder ribs. Clean the
entire area using compressed air.

Wacker Neuson BS 60-4 Specifications

General

Engine Manufacturer	Honda
Displacement	163 cm³
Operating Weight	66 kg
Percussion Rate	700 blows/min
Engine	Honda GX 160
Stroke	60 mm
Engine Type	4-stroke
Fuel Tank Capacity	3.0 liters