BTS 630, 635 3 Safety
Operator's manual 27
2 Danger of kickback.
Machine kickback can cause severe
injury.
Do not use the upper quarter of the
cutting blade to cut.
2 Cutting blades can break, causing severe
injuries.
Only use undamaged cutting blades.
Do not use cracked, broken or twisted
cutting blades.
2 Danger of poisoning.
Do not inhale exhaust fumes. They
contain toxic carbon monoxide that can
lead to unconsciousness or death.
In closed or partially closed rooms such
as tunnels, drifts or deep trenches,
ensure sufficient ventilation by, for
example, providing a powerful exhaust
air fan.
3 EU emission information label
3
This label is an example only
and may vary from machine to
machine.
EPA emission information label (for EPA
machines).
Emission Control (Exhaust &
Evaporative) EPA 2010 and later.
The emission control system for the
engine is EM (Engine Modification) and
for the fuel tank the control system is
EVAP (Evaporative Emissions) or N (for
Nylon tank).
Product emission durability (Emission
compliance period).
The 300 hours emission durability
compliance period is the time span
selected by the manufacturer certifying
the engine emissions output meets
applicable emissions regulations,
provided that approved maintenance
procedures are followed as listed in the
maintenance section of this manual.
Item Label Description
To Next Page
Loading...
Need help?
General
