EasyManuals Logo

Wacker Neuson BTS 630 User Manual

Wacker Neuson BTS 630
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
BTS 630, 635 10 Maintenance
Operator's manual 57
10.3.6 Checking/cleaning/replacing the spark plug
Performing preparations
1. Switch off the engine.
2. Let the machine cool off.
Removing the spark plug
1. Unscrew and remove the air cleaner cap.
2. Clean the air cleaner housing and the area around the spark plug thoroughly.
3. Pull off the spark plug cap from the spark plug.
Note: Do not pull the spark plug cap off the spark plug by the ignition cable.
4. Loosen the spark plug with a combination wrench.
5. Unscrew the spark plug manually.
CAUTION
Touching a hot spark plug can cause burns.
f Only remove the spark plug when the engine has cooled down.
Item Designation
1 Air cleaner cap
2 Spark plug cap

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BTS 630 and is the answer not in the manual?

Wacker Neuson BTS 630 Specifications

General IconGeneral
BrandWacker Neuson
ModelBTS 630
CategorySaw
LanguageEnglish

Related product manuals