BTS 630, 635 9 Use and operation
Operator's manual 47
9.3 Operating the machine
Note: When cutting, lightly pressing the cutting blade against the cutting
material produces a very pleasant vibration response as well as a
particularly narrow cut.
Holding and guiding the machine
1. Stand in a fixed position.
2. Always hold the machine with both hands, using both handles.
Setting the protective cover
f Use the adjustment handle to set the protective hood such that its lower
section is almost in contact with the workpiece.
WARNING
Injuries from insufficiently guided or uncontrolled machine.
f Always hold machine with both hands and stand firmly.
Item Designation
1 Adjustment handle
To Next Page
Loading...
