BTS 630, 635 3 Safety
Operator's manual 9
3Safety
3.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine must only be used for the following purposes:
Cutting concrete, stone and ceramic.
Cutting metal.
Cutting asphalt.
The machine may only be used with cutting blades that are intended for use with
the machine and the material to be cut.
The machine may not be used for the following purposes:
Cutting wood.
Cutting plastics.
Cutting materials that contain asbestos or other hazardous materials.
Cutting fibrous or soft materials.
Grinding (with the side surface of the cutting blade).
The machine may not be operated with blades, knives, brushes, etc.
Do not use the machine as a hand-held circular saw.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and
maintenance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
To Next Page
Loading...
Need help?
General
