BTS 630, 635 7 Transport
Operator's manual 35
7 Transport
Transporting the machine
1. Switch off the engine.
2. Detach the cutting blade.
3. Lift the machine using the front handle.
4. Place the machine on or into a suitable means of transport.
5. Secure the machine against falling over and down or sliding.
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety information of this operator's manual, see chapter
Safety.
WARNING
Hazard of fire and explosions by fuel.
Any fuel that escapes can ignite and cause severe burns.
f Lift and move the machine in the upright position.
To Next Page
Loading...
Need help?
General
