EasyManua.ls Logo

Wacker Neuson DPU 6055 - Cold Weather Starting Procedure

Wacker Neuson DPU 6055
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
T01006GB.fm 26
6.5 Starting in cold weather
Always free the engine if the temperature is less than -5 °C (23 °F).
1. Push the throttle lever (8) to the full throttle position.
2. Turn decompression lever to any position in front of starting position
„f“.
3. Crank the engine counter-clockwise with the safety start crank (24)
as long as necessary until cranking becomes easier (10 to 20 crank
turns).
4. Press pin „d“ in for approx. 5 seconds.
f

Related product manuals