Wacker Neuson ET16 - Page 138

5-36 BA ET16 de* 1.0 * et16b510.fm
5 Operation
1. Move the attachment inward completely and position it at 5–10 cm (2–
4 in) above the ground.
2. Unlock switch D and press it to position 1.
➥ The quickhitch is enabled and the buzzer sounds.
3. Press and hold the foot-operated touch button E and at the same time
pull back the J dozer blade lever.
➥ The quickhitch opens.
➥ Check pin F must be fully extended.
4. Retract the bucket cylinder.
➥ The attachment is lowered to the ground.
Fig. 165
D
1
Fig. 166
E
J
Fig. 167
F
Fig. 168