7-4 BA ET16 de* 1.0 * et16w700.fm
7 Maintenance
7.2 Maintenance overview
Maintenance plan
Daily maintenance (user)
Inspection work
(Check the following fluids and lubricants, check the oil levels after a test run and add oil if nec-
essary)
Page
Check the fluids and lubricants (engine oil, engine coolant, hydraulic oil)
7-30, 7-32,
7-38
Check the radiator and hydraulic oil cooler for dirt, clean them if necessary 7-33
Lubricate the machine according to the lubrication schedule 7-9
Check the dirt indicator on the air filter
1
7-34
Check the water separator and fuel filter: drain water if necessary (see sight glass) 7-27
Check the track tension and retension the tracks if necessary 7-43, 7-44
Check the engine air intake 7-35
Check pin lock --
Check line fixtures --
Check indicator lights for correct function 4-28
Check the hydraulic couplings for dirt --
Clean the lights/light system, signaling systems --
Hydraulic quickhitch system: check acoustic warning system 5-30
Check the threaded fittings of the protective structures (canopy, for example) for tightness --
Option
Adjust the mirrors correctly, clean them and check them for damage, check the fastening
screws and tighten them if necessary
4-12
Leakage check
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings of the follow-
ing assemblies and components. Repair if necessary
Page
Engine and hydraulic system --
Travelling drive --
Cooling systems, heating, and hoses (visual check) --
Option
Hydraulic quickhitch (Easy Lock) --
Visual check
Correct function; deformations, damage, surface cracks, wear and corrosion Page
Check the exhaust system for damage --
Check the insulating mats in the engine compartment for damage --
Check the canopy/cabin and protective structures for damage (for example, the FOPS struc-
ture)
--
Check the tracks for damage --
Check the travel gear for damage (for example the track rollers, insert rolling bearings) --
To Next Page
Loading...
Need help?
General
