7-24 BA ET16 de* 1.0 * et16w700.fm
7 Maintenance
7.6 Lubrication work
– see chapter “ Preparing lubrication” on page 7-8
7.7 Fuel system
Important information regarding the fuel system
In order to prevent wet stack, fill up the fuel tank completely at the end of
each workday.
Do not run the fuel tank completely dry. Otherwise, air is drawn into the
fuel system. This requires bleeding the fuel system.
Diesel fuel specification
Engine damage due to incorrect or dirty diesel fuel.
► Only use clean diesel fuel according to the fluids and lubricants list.
► Do not use any diesel fuel with additives.
To Next Page
Loading...
