Wacker Neuson ET16

8-2 BA ET16 de* 1.0 * et16b800.fm
8 Malfunctions
8.2 Malfunctions of the travelling drive
8.3 Malfunctions of the hydraulic system
Malfunction/sign Possible cause Remedy See
Machine does not stay on track,
machine pulls to the right or left
Wrong track tension Tighten tracks correctly 7-44
Foreign bodies (stones, for
example) stuck in tracks
Remove foreign bodies --
Uneven wear of tracks Contact a service center --
Malfunction/sign Possible cause Remedy See
Hydraulic system overheats
Dirty hydraulic oil radiator
Clean the hydraulic oil radi-
ator
7-33
Hydraulic oil level too low Adding hydraulic oil 7-39
Malfunctioning or insuffi-
ciently tightened V-belt
Contact a service center --
The display element emits a continu-
ous buzzing sound
Malfunctioning pressure
switch of safe load indicator
Stop machine operation
immediately, have the
error repaired by a Wacker
Neuson service center
--
Controls have no function
Control lever base raised
Lower the control lever
base
4-35
Malfunctioning fuse Check the fuse 9-5
Upper carriage cannot be swivelled Upper carriage locked Remove the pin 6-8